OKPOS OK30 - 8 Specifications; General Specifications

21
8. Specifications
Appendix A : Specifications
8-1. General Specifications
(1) Printing Method Direct line thermal printing.
(2) Print speed 200mm/sec
(3) Dot density (Hor / Ver) 180 DPI X 180 DPI
(4) Dot Pitch 0.141mm X 0.141mm
(5) Printing Width Max 72mm (576 dots)
(6) Number of print columns.
Font “A” Font “B”
42 columns 56 columns
(6) Roll paper Refer to chapter 2 for details on the recommended roll Paper.
Paper width : 50mm~82.5mm
Roll diameter : Max. Ø80mm
(7) Weight 1.6Kg