OKPOS OK30 - Auto Cutter Specifications; Interface; Electrical Characteristics

23
8-2. Auto Cutter Specifications
(1) Cutting Frequency Max. 30 cuts per minute
(2) Thickness of paper 0.06 ~ 0.09 mm
(3) Cutter Life 1.5 million cuttings
8-3. Interface
USB (B type) + Serial(9P+RJ45 Modular) / Centronics Parallel / Ethernet / 25Pin Serial / WLAN Card
8-4. Electrical Characteristics
(1) Input Voltage DC 24V ± 10%
(2) Current Consumption Operating:Approx. 1.5A (at ASCII printing)
Peak : Approx. 10 A
(at print duty 100%, For 10 seconds or less)
Stand-by : Approx. 0.03 A(RMS)
(3) Power Connector