Personalization Features
Memory Seat and Mirrors
The following list of features that are available on your
The
transmitters can also be programmed to move the
Aurora can be programmed to the driver’s preference for
driver’s seat and outside mirrors to a set memory
each
of
the key transmitters. position when the key transmitter’s UNLOCK button
0
0
0
a
Memory Door Locks:
This
feature programs your
door
locks
to
automatically lock or unlock when
shifting in and
out
of
PARK
(P).
Security Feedback:
This feature provides feedback
to the driver when the vehicle receives
a
command
from the key transmitter.
Delayed Locking:
This
feature lets the driver delay
the actual locking of the vehicle. When all doors
have been closed, the doors will lock automatically
after five seconds.
Perimeter Lighting:
When the UNLOCK button
on
the key transmitter is pressed, the headlamps,
parking lamps, back-up lamps and cornering lamps
will turn
on
in
dark conditions.
For more detailed information and programming
instructions, refer to the Index for each individual
feature listed above.
is
pressed.
To
program the system:
1. Adjust the driver’s seat to a comfortable position.
Adjust both outside mirrors
to
suit
you. See
“Mirrors” in the Index.
2.
Press the SET button on the driver’s door panel.
You
will hear one beep.
3.
Within five seconds, press one of the two memory
buttons on
the
door panel.
You
will hear two beeps to
confirm that the mirror and the seat positions are
entered into memory.
4.
Press the UNLOCK button on the appropriate
transmitter within five seconds.
You
will hear
two beeps.
The
second key transmitter can be programmed
to
record
a
different seat and mirror position by following
the same steps.
2-11
To Next Page
Loading...
Need help?
General
