Name: Olivetti EXPLOR@460
Brand: Olivetti
Rating: 4 (1 reviews)

To Next Page

To Previous Page

EXPLOR@460

Chapter 1

4. Feed one head of the cables (depends on your application) through the base of the

device as shown below.

5. Remove the film on the back of the plastic spacer; and then stick the spacer to

the base bracket as shown.

Feed the heads of all the cables (depends on your application) through the

base bracket.

6. Connect heads of all the cables to the ports of the back I/O panel of the POS

device.

7. Feed other heads of all the cables, through the 2nd display support.

Questions and Answers:

Need help?

Do you have a question about the Olivetti EXPLOR@460 and is the answer not in the manual?

Olivetti EXPLOR@460 Specifications

General