When " S" blinks in the view-
finder while the camera is in either
the AUTO or FILL-IN modes,
switch to the AUTO-S mode. The
blinking " S" will disappear.
Press the FLASH button to
change the mode to AUTO-S.
will light in the LCD panel.
Pressing the shutter release button,
a preparatory flash emission occurs
before the shutter is released with
the main flash emission. The pre-
paratory flash emission produces a
flickering beam of light which
"prepares" your subject's eyes by
reducing pupil size. The main flash
emission is the same as the normal
auto flash emission.
26
To Next Page
Loading...
