Olympus C-3000 - 3.2MP Digital Camera - Page 25

175
When the position is set,
press the OK button.
Move the cursor to set the
bottom right corner of the
image that you would like to
print.
• Use the same procedure as in
step 4.
• Press the Print button to go
back to the upper left corner
setting screen.
Press the OK button to set the
trimming size. The image is
displayed on the LCD monitor.
Press the OK button again to
display the Single-frame print
reserve screen.
• Following the procedure for
Single-frame print reserve, set
the number of prints, date/time,
and trimming. (p. 170)
• If you would like to continue to
trim other images, repeat the
above procedure from steps 1
to 8.
8
7
6
5
OK
CANCEL SET
OK
Displayed for 1 second.
When the setting is finished, the
image and frame are displayed for
1 second, then the PRINT
ORDER menu reappears.