27
Warning:
Incorrect use may cause a fire or electric shock.
• Be sure to use an Olympus AC adapter. Olympus is not
responsible for any damage caused by the use of other kinds of
AC adapters.
• Use an AC120V power source.
• NEVER connect or disconnect the AC adapter with wet hands.
• If the cord of the AC adapter is hot, smells like smoke or is
emitting smoke, unplug it immediately and contact your nearest
authorized Olympus service center.
• Make sure that the camera power is off before connecting or
disconnecting the AC adapter.
• Make sure the AC adapter is properly plugged into the outlet.
• When disconnecting, hold the body, not the cord, of the AC
adapter. Never pull, bend, twist or modify the cord.
• If there is any damage on the cord or if there is a contact failure,
stop using it and contact your nearest authorized Olympus
service center.
• Keep the AC adapter disconnected when the camera is not in
use.
To Next Page
Loading...
