Taking close-up pictures (Macro mode)
Advanced shooting
3
58
3
Press until is displayed.
The setting changes in the sequence AF -
- each time is pressed.
When the macro mode is selected, the
macro mode indicator is displayed.
4
Take the picture while observing
your subject on the monitor.
To cancel macro mode, press repeatedly until AF appears. The
macro mode indicator disappears.
The macro mode is canceled when the lens barrier is closed. “Saving
the settings (All Reset)” ( p.110)
• In the macro mode, keep a minimum distance of 0.2 m - 0.8 m/0.7 ft
- 2.6 ft between the camera and the subject. When the camera is too
close to the subject, the green lamp blinks.
• If you use the flash in macro shooting, shadows may be conspicuous
and the correct exposure may not be achieved.
To Next Page
Loading...
