Selecting the ISO sensitivity
Adjusting the image quality and exposure
4
74
5
Press to select one of the
ISO settings: AUTO, 100, 200 or 400,
then press .
The ISO value is set.
To close the menu, press again.
6
Take the picture.
The ISO value returns to AUTO (factory default setting) when the lens
barrier is closed. “Saving the settings (All Reset)” ( p.110)
• Higher ISO settings produce more electrical noise.
• The ISO is standardized based on the sensitivity of normal camera
film. The scale is approximate.
• When the ISO is set to AUTO and you are shooting in dark conditions
without a flash, the ISO automatically increases, otherwise the
shutter speed will be reduced, possibly resulting in camera
movement and blurred images.
• If the subject is too far away for the flash illumination to reach when
the ISO is set to AUTO, the ISO is automatically increased.
200
400
100
CARDSEt PIC
CAMERA
DRIVE
ISO
DIGItAL ZOOM
PANORAMA
2 IN 1
AUtO
To Next Page
Loading...
