Olympus Camedia C-3000Zoom - Connecting to a Television

124
CONNECTING TO A TELEVISION
Recorded images can be viewed on a TV. If sound is recorded with the
image, it will be played as well.
Make sure that the power of the TV and the camera are off before
connecting.
Connect the AV cable to the
camera’s A/V output connector,
then connect it to the TV’s
audio (white) and video
(yellow) input connectors.
Turn on the TV.
Set the Mode dial to
.
Select a picture using the Jog
dial.
[When using the remote control]
Aim the remote control at the
Remote control window on the
camera. Press the +/– buttons to
select a picture. Press the W button
for Index-Display. Press the T button
for Close-Up display, and select the
section to view with the +/– buttons.
4
3
2
1
A/V output connector
A/V cable
P
A/S/M
O
F
F
P
O
W
E
R
/
M
O
D
E
D
I
A
L
4
3
1