145
Press the left arrow on the
Jog dial to confirm the setting.
If you record a movie without
pressing the OK button, the
setting will be valid until the
Menu is canceled.
• Press the OK button to save
the setting and cancel the
Menu.
6
5
Note:
• Unless OFF is selected in All Reset, the setting will be canceled and reset
to auto when the power is turned off. (p. 194)
• Images will appear grainy when the ISO is high.
• When AUTO is selected, the ISO is automatically set high in low-light
situations when the flash is not used, to prevent blurring from camera
movement.
• The sensitivity scale is based on the one used for picture film, but the
numbers are for reference only.
• The higher the ISO, the faster the shutter speed that can be used and the
lower the amount of light required.
6
5
To Next Page
Loading...
