225
4 The subject was too small and was backlit.
[ Set the flash to Fill-In mode. (P. 64) Or, use the Spot metering
mode. (P. 68)
5 The Sequence mode was used.
[ The shutter speed is high, so in dark conditions pictures will be
darker than normal.
The picture is too bright.
1 The flash mode was set to the Fill-in flash mode.
[ Select a flash mode other than the Fill-in flash mode. (P. 64)
2 The subject was excessively illuminated.
[ Adjust the exposure compensation or change the camera position
toward the subject. (P. 63/134)
The colors of pictures taken indoors look unnatural.
1 The lighting fixture(s) affected the picture.
[ Set the flash mode to Fill-In. (P. 64)
2 The subject is mostly dark.
[ Include white in the image or adjust the white balance.
(P. 82/142)
3 The white balance setting is wrong.
[ Adjust the white balance. (P. 82/142)
The picture has obscured edge(s).
1 The lens was partly blocked by a finger or the strap.
[ Hold the camera correctly, keeping your fingers and the strap
away from the lens. (P. 38)
2 The shooting distance was too close.
[ Use the LCD monitor. (P. 50/128)
To Next Page
Loading...
