60
Note:
• When the right exposure cannot be attained, the shutter speed display
will blink and (overexposure) or (underexposure) will appear on
the LCD monitor.
• Shutter speed setting is valid only when the Shutter priority mode is
selected.
• Unless OFF is selected in All Reset, the setting will be canceled when the
power is turned off. (p. 194)
SHUTTER PRIORITY MODE (Cont.)
When the Mode dial is set to A/S/M, ISO is set to 100 automatically. The
ISO setting can be selected from 100, 200 or 400. (P. 84)
Changing the ISO setting does not affect the shutter speed setting.
Available shutter speed settings: 1 to 1/800 second.
To Next Page
Loading...
