20
■ When taking a still picture
● The camera emits a short double-
beep when it has finished taking the
picture.
● To check the picture you’re just
taken, you can view it on the display.
● Continuous shooting is possible if
the memory gauge shows there is
space on the card.
● When the buffer memory is full, the
top of the memory gauge will light
up and no more pictures can be
taken.
Memory gauge
number of storable pictures
1 shot
taken
2 or more
shots taken
No photography
possible
No shots
taken
● Never open the card cover, eject the card, remove the batteries, or unplug
the AC adapter while the card access lamp is blinking. This could not only
prevent the recording of your current picture, but could also destroy the
images recorded on the card.
■ Recording movies
To begin shooting, press the shutter
button down fully. To stop shooting,
press the shutter button again.
● If the green lamp blinks, the focus
and exposure are not locked. To
focus on a subject that is not in the
center of the shot, use Focus Lock.
To Next Page
Loading...
