30
En
SHOOTING BASICS (Cont.)
Using the flash
Auto-flash (No indication, factory default setting) :
Automatically fires in low-light and backlight conditions.
Red-eye reduction flash :
Significantly reduces the phenomenon of “red-eye” (subject’s eyes appearing
red).
Fill-in flash :
Always fires regardless of the lighting conditions.
Flash off :
For situations where flash is prohibited, or when not using the flash.
Slow synchronization SLOW1 SLOW2 SLOW:
In the top menu, select MODE MENU T CAMERA T SLOW T SLOW1,
SLOW2 or SLOW. Press .
Press again to cancel the menu.
1st curtain (front curtain) SLOW1 (factory default setting):
Adjusts the flash for slow shutter speeds.
2nd curtain (rear curtain) SLOW2:
In contrast to 1st curtain, 2nd curtain fires the flash just before the shutter
closes.
1st curtain with red-eye reduction SLOW:
Adjusts the flash for slow shutter speeds, and minimizes red-eye.
Press the (flash mode) button repeatedly until the desired flash mode
indication appears.
1 C4000ZBasic-E1 02.6.17 10:44 AM Page 30
To Next Page
Loading...
