37
En
Playback on a TV
1 Make sure that the TV and camera power are off .
2 Connect the camera’s VIDEO OUT jack to the TV using the video
cable.
3 Set the mode dial to . Turn on the TV. Set the TV to the video input
mode.
● For details on switching to video input, refer to your TV's instruction
manual.
4 Select an image by using the arrow pad.
● The selected image will be displayed on the TV.
● There may be times when you want to rotate a picture. With picture
rotation, you can turn them horizontally, 90 degrees clockwise, or
counter-clockwise. Each time the button is pressed, the picture is
rotated.
Connect to the TV's video
input (yellow) terminal.
Video cable
Connect to the VIDEO OUT jack.
Mode dial
Connector cover
● Make sure that the camera’s video output signal type is the same as the
TV’s video signal type.
1 C4000ZBasic-E1 02.6.17 10:44 AM Page 37
To Next Page
Loading...
