43
En
Possible causes
The card is not
formatted.
There are no
pictures on the card,
so there is nothing to
play back.
There is no empty
space on the card, so
it cannot record new
information such as
print data.
The card cover is
open.
The battery is dead.
The camera stops
working.
The card access
lamp and self-timer
lamp blink at the
same time.
Indications
Consult your nearest Olympus dealer or customer
support department (see back cover).
Other indications
Corrective
action
Format the card.
Insert a card that contains
images.
Replace the card or erase
unneeded pictures.
Close the card cover.
Install either new or freshly
charged batteries.
1 C4000ZBasic-E1 02.6.17 10:44 AM Page 43
To Next Page
Loading...
