23
1
Getting started
Power on/off
When shooting pictures (Shooting mode)
Power on: Open the lens barrier fully.
The camera turns on in the shooting mode. The lens
extends and the subject is displayed on the monitor.
If the lens does not extend when the lens barrier is opened,
there is a possibility that the barrier is not fully open. Open
the lens barrier fully until you feel it click.
Power off: Close the lens barrier slightly until it almost touches
the lens barrel.
The lens barrier stops just before it touches the lens and the
lens retracts. Wait until the lens is fully retracted before
closing the lens barrier completely.
The camera turns off. (The monitor also turns off.)
To Next Page
Loading...
