137
Playback
7
Playback on a TV
Use the AV cable provided with the camera to play back recorded images on
your TV. You can play back both still pictures and movies on your TV.
1 Make sure that the TV and camera are turned off. Connect
the A/V OUT jack on the camera to the Video input
terminal on the TV using the AV cable.
2 Turn the TV on and set it to the video input mode.
• For details of switching to video input, refer to your TV’s instruction
manual.
3 Slide the power switch to q to turn the camera on.
• The last picture taken is displayed on the TV. Use the arrow pad to
select the picture you want to display.
• The close-up playback, index display and slideshow functions can also
be used on a TV screen.
TIPS
• You are recommended to use the optional AC adapter when using
the camera with a TV.
• Make sure that the camera’s video output signal type is the same as
the TV’s video signal type.
g“VIDEO OUT – Video output selection” (P.172)
• The camera’s monitor or vie
wfinder turns off automatically when the AV cable is connected to the
camera.
•
Be sure to use the AV cable provided to connect the camera to the TV.
• The picture may appear off-center on the TV screen.
Connect to the TV’s video input (yellow)
and audio input (white) terminals.
AV cable
A/V OUT jack (MONO)
Connector cover
Note
To Next Page
Loading...
