56
3
Shooting basics
Recording movies
This function allows you to record movies. If R is set to ON, sound is recorded
at the same time.
If you select MPEG4 for the record mode, you can record a long movie in
MPEG format.
g“Record mode” (P.106)
1 Slide the power switch to n.
g“Power on/off” (P.25)
• The monitor turns on.
• The available recording time on the card
that you are using is displayed.
2 Decide the composition of the
picture.
• You can use the zoom lever to enlarge
your subject.
3 Press the shutter button fully to
start recording.
• You can adjust the zoom during movie
recording.
• The card access lamp blinks while the
movie is stored on the card.
• During movie recording, N lights red.
Shutter button
Card access lamp
Power switch
Zoom lever
00:36
To Next Page
Loading...
