170
PIXEL MAPPING
8
Useful functions
• When the File No. reaches 9999, the file number returns to 0001
and the folder number changes.
•
When both the Folder and File No. reach their respective maximum number
(999/9999), the number of storable pictures becomes 0 even if the card is not
full. No more pictures can be taken. Replace the card with a new one.
The Pixel Mapping feature allows the camera to check and adjust the CCD and
image processing functions. It is not necessary to operate this function frequently.
Approximately once a year is recommended. Wait at least one minute after taking
or viewing pictures to allow for proper performance of the Pixel Mapping function.
1 In the top menu, select MODE
MENU Æ SETUP Æ PIXEL
MAPPING, and press d.
g“How to use the menus” (P.35)
• START appears.
2 Press e.
• The BUSY bar is displayed during Pixel
Mapping. When Pixel Mapping is
finished, the screen returns to the mode
menu.
• If you accidentally turn the camera off during Pixel Mapping, start
again from Step 1.
Note
PIXEL MAPPING
Arrow pad
OK button
BUSY
Note
To Next Page
Loading...
