24
Macintosh
Connecting the camera to the computer
1 Some camera models have
a “USB” setting in the
menu. Make sure that “PC”
is selected before
connecting.This is not
required if your camera
does not have this setting.
For details on how to
operate the menu, refer to your camera's reference manual.
2 Insert the marked end of the USB cable into the USB port on your
computer as shown below.
3 After making sure that the camera is turned off, connect the end
of the USB cable to the USB connector on the camera.
The location of the USB connector or multi connector varies depending
on the camera model. Refer to the camera manual for details.
The location of the USB port varies depending on the computer. For details,
refer to your computer’s manual.
Menu button
Arrow pad
PLAYEDItCARD
SEtUP
[SETUP] tab
Look for this mark.
USB port
Terminal
USB port
Computer
USB connector or
multi connector
USB cable
Smaller terminal
Rectangular terminal
To Next Page
Loading...
