40 En
En
J FORMATTING (CARD SETUP)
This function lets you format a card. Formatting prepares cards to receive data.
Before using non-Olympus cards or cards which have been formatted on a PC,
you must format them with this camera.
• All data stored on the card, including protected pictures, is erased when
the card is formatted. When formatting a used card, confirm there are
no pictures that you still want to keep on the card.
1 In the top menu, select MODE MENU → CARD → CARD SETUP,
and press d.
• P A S M r n m l j i
The I FORMAT screen is displayed.
• q
The CARD SETUP screen is displayed.
2 If the mode dial is set to P A S M r n m l j i, press
a to select YES.
If the mode dial is set to q, press c to select I FORMAT, then
press e. The I
FORMAT screen is displayed. Press a to select
YES.
3 Press e.
• The BUSY bar is displayed and the card is formatted.
Note
basic_e_d4155_6.fm Page 40 Monday, December 8, 2003 10:02 AM
To Next Page
Loading...
