Olympus Camedia D-100 - Viewing Multiple Images Automatically in Sequence (Slide Show)

48
VIEWING OR ERASING IMMEDIATELY AFTER SHOOTING
Viewing Multiple Images
Automatically in Sequence (Slide Show)
Images in the card can be viewed automatically in their stored order. This function is useful for
presentation purposes at a meeting etc., as well as for checking all the images stored in the card.
1. Press the OK/menu button.
[ The monitor shows the playback mode
menu 1/3.
2. Select by pressing the or
arrow pad key, and then select
“YES” by pressing the or
arrow pad key.
3. Press the OK/menu button.
[ Slide Show starts by displaying each
frame for 3 seconds.
1/3
SET
OK
SELECT
NO
OFF
NO
NO
OK/menu button
Arrow pad
1/3
SET
OK
SELECT
NO
OFF
NO
NO
SET
OK
OFF
NO
YES
Check that the camera is set to the
Playback mode by holding down
the monitor button for a moment.
Operating Procedure
Press until the
monitor turns on.
Playback mode menu 1/3 screen
Playback mode menu 1/3 screen