Olympus Camedia D-100 - Preventing Accidental Erasure (Protection)

/3
NO
ON
NO
NO
50
VIEWING OR ERASING IMMEDIATELY AFTER SHOOTING
Preventing Accidental Erasure (Protection)
OK/menu button
Arrow pad
1/3
SET
OK
SELECT
NO
OFF
NO
NO
It is recommended that you protect important images to avoid accidentally erasing them.
When an image is protected, it cannot be erased.
1. Select the image frame to protect by
pressing the or arrow pad key.
(The frame can also be selected even in the
4-frame or 9-frame display mode.)
2. Press the OK/menu button.
[ The monitor shows the playback mode
menu 1/3.
3. Select by pressing the or
arrow pad key.
4. Select “ON” by pressing the or
arrow pad key.
5. Press the OK/menu button.
[ The selected image frame is protected
(image locked) and the protect indicator
is displayed at the top right of the
image.
Check that the camera is set to the
Playback mode by holding down
the monitor button for a moment.
Operating Procedure
1/3
SET
OK
SELECT
NO
OFF
NO
NO
Press until the
monitor turns on.
Playback mode menu 1/3 screen
Playback mode menu 1/3 screen