MULTI PRINT
You can create popular 16-cut prints.
● In order to make sticker prints, the specialty paper must be
set in the P-300 printer’s paper feeder.
1 Press the Function button in the Display mode to select
the Multi Print mode.
2 Select frames with the Previous (–)/Next (+) button and
press the OK button at each picture to be printed.
3 Enter the number of copies to be printed on the printer,
then press the DIRECT PRINT button to start printing.
● See page 132 for connection to the printer.
◆ The Date-Print is not available in the Multi Print
mode.
Note:
To Next Page
Loading...
