E
68
When using the utility software.
1 Connect the camera to a personal computer. (p. 152)
2 Start up the utility software.
3 Once the program has been loaded, select “Camera
Setting” from the menu bar. The camera settings window
appears.
4 Set the date and time as indicated in the camera settings
window.
* For exact information on how to use the utility software,
refer to the online manual provided with the software.
◆ Be sure to set the date, regardless of whether or
not the date is to be printed.
◆ The adjusted date is canceled when the camera
is left without batteries for approx. one hour
(based on our tests). In such a case, adjust the
date again.
◆ We recommend that you check the date and time
before taking important pictures.
Note:
To Next Page
Loading...
