19
En
TURNING THE CAMERA ON
1
Slide the POWER switch to K, pressing and
holding the lock button.
Note
To save battery power, the camera automatically enters sleep mode and stops
operating after about 3 minutes of non-operation. The camera activates again
as soon as you lightly press the shutter button or zoom lever.
4 hours after the camera enters sleep mode, the camera turns off
automatically. Turn the camera on to use.
The camera turns on when the
POWER switch is set to shooting
mode.
The lens extends and the monitor
turns on.
Battery check indicator
POWER switch
Shooting mode
Lock button
d4255_basic_e_00_bookfile_7.book Page 19 Wednesday, June 8, 2005 1:33 PM
To Next Page
Loading...
