103076-01EN [U8998318], Rev. C, June 2014
Operation 17
6.3 Exit Options
Figure 6-4 Exit options
The user has three options:
1. Soft reboot
Restart operating system (OS) and the application.
2. Power OFF
Turn the analyzer off after confirmation.
3. Relaunch
Restart the application.
All user interface (UI) screens have a time-out (power-saving) feature that causes the screen to go blank if the UI is not
accessed or if the instrument is not moved within a 90-second interval. However, when this mode is enabled, the analyzer
is still running. To restore the screen, tap it or move the instrument.
Setup screen
Exit
Confirm
The user has 3 options (see
below)
To Next Page
Loading...
