Olympus DM-1 - Setting an Index Mark

27
VOICE
Index Marks
Index Marks
Index marks can be incorporated into a file during recording or playback to make it easy to locate
interesting information. Index marks enable faster access to important information by pressing the
FF/+ or REW/– button.
Setting an Index Mark
1
Press the INDEX button during
recording or playback to set an index
mark.
An index mark is set and the index number
appears on the display.
Clearing an Index Mark
1
Play the file with the index mark you
want to clear.
2
Press the FF/+ or REW/– button to
choose the index mark to be cleared.
3
Press the ERASE button while the index
number appears for approximately 2
seconds on the display.
The index mark is erased.
Index numbers are reassigned automatically.
1
M
E
N
U
IN
D
E
X
/E
Q
REC
STOP
ERASE
2
1
3
MENU
INDEX/EQ
REC
S
T
O
P
E
R
A
S
E
..................................................................................................................................................
Notes
• Up to 16 index marks can be set in a file. Attempting to set more index marks will cause “INDEX FULL” to
appear on the display.
• Index marks cannot be set or cleared in a file stored on a SmartMedia card with a write-protect seal
attached to it (→ P.8).
• Index marks cannot be set or cleared in a locked file (→ P.32).