Olympus DM-550 - Page 39

39
3
Playback
Clearing an index mark or a temp
mark:
1 Locate the index or temp mark
you want to clear.
2 Press the 9 or 0 button to
select the index or temp mark to
erase.
3 While the index or temp number
appears for approximately 2
seconds on the display, Press the
ERASE button.
• The index or temp mark is erased.
• Index or temp numbers after the
erased index or temp number will
automatically move up.
Playback
Notes
• Temp marks are temporary markings, so
if you transmit a le to the PC, or move
it with a PC, they will be automatically
erased.
• Up to 16 index and temp marks can be
set in a le. If you try to place more than
16 index or temp marks, the [Index Full]
message will appear for index marks, and
[Temp Mark Full] for temp marks.
• Index or temp marks cannot be set or
erased in a locked le (☞ P.46).
• When the index or temp marks are set, the
management le will be created for each
le.