Olympus DSX1000 - Installation and Application Handling; Prevention of Electric Shock; Electric Safety

Operating procedure
Reference information
Introduction
Advanced
1
Operation of tilt observation
1. Press the [Tilt Position] button on the GUI or [Tilt Position] button on the console.
2. Adjust the focus with the Focusing knob
3. Rotate the Tilting lock lever to release the tilting lock.
4. Tilt the head holding the Rotation-release knob on the head arm.
5. Stop the head at an arbitrary position and release your hand from
Rotation-release knob.
Operation of tilt
observation
Operation of
Rotatable stage
Replacement of
objective and
option unit
List of objectives
and corresponded
observation modes
Objectives and
attachment
management
Items often
referred in the
Instruction Manual
Configuration of the
Instruction Manual
Software Console
1. [Tilt Position] button
* Aligning the upper surface of the sample to the horizontal
line helps you to roughly adjust the focusing.
9
2. Focusing knob
4. Rotation-release
knob
3. Tilting lock
lever
1. [Tilt Position]
button