82
EN
Playback functions
8
Lets you erase recorded images. You can select single-frame erase, which erases only the
currently displayed image; all-frame erase, which erases all the images stored on the card; or
selected frame erase, which erases only the frames selected.
x Notes
• When you perform all-frame or selected frame erase on images recorded using RAW+JPEG,
both the RAW and JPEG images are erased. When using single-frame erase, you can select
whether to erase the JPEG, RAW, or both RAW and JPEG images. g“RAW+JPEG
ERASE” (P. 89)
• Protected images cannot be erased. Cancel protected images, then erase them.
• Once erased, images cannot be restored. g“Protecting images” (P. 81)
Single-frame erase
1 Play back the image you want to erase and press
the S button.
2 Use ac to select [YES], then press the i
button.
Erasing selected frames
This function lets you erase selected images at one time during single-frame playback or
index display.
1 Display the images you want to erase and press the i button.
• The selected images will be shown with red frames.
• To cancel your selection, press the i button again.
• During index display, press p to select the images you want to erase and press the i
button.
2 Press p to display the next images you want to erase and press the i button.
3 After you have selected the images to erase, press the S button.
4 Use ac to select [YES], then press the i button.
All-frame erase
1 MENU[W][CARD SETUP]
2 Use ac to select [ALL ERASE], then press the i button.
3 Use ac to select [YES], then press the i button.
• All frames will be erased.
Erasing images
S button
s0029_e_00_0_unified.book Page 82 Monday, March 2, 2009 5:26 PM
To Next Page
Loading...
