Olympus E-PL6 - Saving Myset; Using Myset; Processing options (Picture Mode)

60 EN
Frequently-used options and customization (Shooting menus)
3
Saving Myset
You can save the current camera settings for modes other than shooting mode. Saved
settings can be called up in P, A, S, and M modes.
1
Adjust settings in order to save.
2
Select [Reset/Myset] in W Shooting Menu 1.
3
Select the desired destination ([Myset1]–[Myset4]) and press I.
• [Set] appears next to destinations ([Myset1]–[Myset4]) to which settings have already
been saved. Selecting [Set] again overwrites the registered setting.
• To cancel the registration, select [Reset].
4
Select [Set] and press Q.
• Settings that can be saved to Myset g “Menu directory” (P. 115)
Using Myset
Sets the camera to the settings selected for Myset.
1
Select [Reset/Myset] in W Shooting Menu 1.
2
Select the desired settings ([Myset1]–[Myset4])
and press Q.
3
Select [Set] and press Q.
Reset/Myset
Reset
Myset1
Myset2
Myset3
Myset4 Set
Set
Set
Set
Basic
Back Set
Processing options (Picture Mode)
Make individual adjustments to contrast, sharpness, and other parameters using
the [Picture Mode] item in [Live Control]. Changes to each picture mode are stored
separately.
1
Select [Picture Mode] in W Shooting Menu 1.
4:3
D
j
2
1
Shooting Menu 1
Card Setup
Reset/Myset
Picture Mode
Image Aspect
Back Set
OnDigital Tele-converter
2
Select an option with FG and press Q.
3
Press I to display settings for the selected option.