111
EN
Information/Separately sold accessories
10
Using separately sold accessories
Electronic View nder (VF-4)
The VF-4 electronic view nder switches on automatically when you look through it.
While the view nder is on, the camera monitor display is switched off. You can select
whether to automatically switch the display between the view nder and monitor using
the menu settings. Note that menus and other settings information are still displayed
on the camera monitor when the view nder is switched on.
# Cautions
• In the following situations, the view nder may not switch off automatically.
When in sleep mode/when shooting using movie, 3D, multiple exposure, live bulb, live
time etc./when the shutter button is pressed halfway/when the monitor is pulled out
• The view nder may also fail to turn on automatically when viewed in certain situations,
such as when wearing glasses, or under strong sunlight. Change to manual settings.
Attaching and removing an electronic view nder
Remove the connector cover while pressing down on the lock release button, and then
keep pressing into the camera hot shoe until it will go no further.
• To remove, turn off the camera, and remove while pressing down on the lock release
button.
Hot shoe
cover
Lock release button
Connector cover
Attaching Removing
To Next Page
Loading...
