82
EN
Frequently-used options and customization (Custom menus)
3
I/H The button can be used to choose between I and H while
the underwater case is attached. Press and hold the button
to return to the previous mode. If this option is selected,
the FL-LM1 will re even when not raised. This enables
U (Underwater) to be set in WB mode. When using an
ED12-50mmEZ lens with power zoom (E-ZOOM), the lens
is automatically zoomed to the WIDE end or TELE end in
accordance with I and H switching.
Live Guide Press the button to display live guides.
b (Digital Tele-converter)
Press the button to turn digital zoom on or off.
AF Stop Stop autofocus.
j/Y
Choose a sequential shooting or self timer option.
#
Choose a ash mode.
HDR BKT Switch to HDR bracketing with the saved settings.
dLock
When set to [Off], the aperture, shutter speed, exposure
compensation, and other items can be set directly using the
dial. Press and hold the button to set to [On].
Off No function is assigned to the button.
Viewing camera images on TV
Use the AV cable provided with the camera to playback recorded images on your TV.
Connect the camera to an HD TV using an HDMI cable (available from third-party
suppliers) to view high-quality images on a TV screen.
AV cable (included)
(Connect to the TV video input jack
(yellow) and audio input jack (white).)
HDMI cable (sold separately: CB-HD1)
(Connect to the HDMI connector on the TV.)
Multi-connector
HDMI Micro connector
(type D)
Type A
1
Use the cable to connect the camera to the TV.
• Adjust settings on the TV before connecting the camera.
• Choose the camera video mode before connecting the camera via an A/V cable.
2
Choose the TV input channel.
• The camera monitor turns off when the cable is connected.
• Press the q button when connecting via an AV cable.
To Next Page
Loading...
