Olympus E-PM1 User Manual

103 EN
Information
11
Exposure warning display
If the optimum exposure cannot be obtained when pressing the shutter button halfway,
the display will blink on the monitor.
Shooting
mode
Warning display
example (blinking)
Status Action
P
60"
60"
F2.8
F2.8
The subject is
too dark.
Increase the ISO sensitivity.
Use the fl ash.
•
•
4000
4000
F22
F22
The subject is
too bright.
Decrease the ISO sensitivity.
Use a commercially available ND fi lter
(for adjusting the amount of light).
•
•
A
30"
30"
F5.6
F5.6
The subject is
underexposed.
Decrease the aperture value.
Increase the ISO sensitivity.
•
•
4000
4000
F5.6
F5.6
The subject is
overexposed.
Increase the aperture value.
Decrease the ISO sensitivity or use a
commercially available ND fi lter (for
adjusting the amount of light).
•
•
S
2000
2000
F2.8
F2.8
The subject is
underexposed.
Set the shutter speed slower.
Increase the ISO sensitivity.
•
•
125
125
F22
F22
The subject is
overexposed.
Set the shutter speed faster.
Decrease the ISO sensitivity or use a
commercially available ND fi lter (for
adjusting the amount of light).
•
•
The aperture value at the moment when its indication blinks varies with the lens type and
focal length of the lens.
•

Olympus E-PM1 Specifications

General

Sensor Type	Live MOS
Sensor Size	17.3 x 13.0 mm
Effective Pixels	12.3 MP
Screen Size	3.0 inches
Screen Resolution	460, 000 dots
Image Stabilization	Sensor-shift
Weight	217 g (body only)
Camera Type	Mirrorless
Continuous Shooting	5.5 fps
Focus Points	35
Built-in Flash	Yes
Storage Media	SD/SDHC/SDXC card
Battery	BLS-5 lithium-ion battery
ISO Range	ISO 200-12800
Video Recording	1920 x 1080 (Full HD)
Shutter Speed	60 sec to 1/4000 sec
Video Format	Motion JPEG
Autofocus System	Contrast Detect (sensor)