Olympus E-PM1 User Manual

54 EN
Other shooting options
2
Taking Panoramas
If you have installed the supplied computer software, you can use it to join pictures
together to form a panorama. g “Using OLYMPUS Viewer 2/[ib]” (P. 73)
Taking pictures for a panorama
1
Select SCN as the shooting mode.
g “Choosing a Shooting Mode” (P. 12) •
P
A
S
M
A
SCNART
n
SETUP
2
Select [Panorama] and press Q.
3
Use FGHI to choose a pan direction.
4
Take a picture, using the guides to frame the
shot.
Focus, exposure, and other settings are fi xed at the
values for the fi rst shot.
•
250250 F5.6 38
M
ISO
200
5
Take the remaining images, framing each shot so that the guides overlap
with the previous picture.
[
2
] 250250 F5.6 38
M
ISO
200
[
3
]
Exit Exit
A panorama may include up to 10 images. A warning indicator (g) is displayed after
the tenth shot.
6
After taking the last shot, press Q to end the series.
# Cautions
During panorama shooting, the image previously taken for position alignment will not be
displayed. With the frames or other markers for display in the images as a guide, set the
composition such that the edges of the overlapping images overlap within the frames.
$ Notes
Pressing Q before shooting the fi rst frame returns to the scene mode selection menu.
Pressing Q in the midst of shooting ends the sequence of panorama shooting, and allows
you to continue with the next one.
•
•
•

Olympus E-PM1 Specifications

General

Sensor Type	Live MOS
Sensor Size	17.3 x 13.0 mm
Effective Pixels	12.3 MP
Screen Size	3.0 inches
Screen Resolution	460, 000 dots
Image Stabilization	Sensor-shift
Weight	217 g (body only)
Camera Type	Mirrorless
Continuous Shooting	5.5 fps
Focus Points	35
Built-in Flash	Yes
Storage Media	SD/SDHC/SDXC card
Battery	BLS-5 lithium-ion battery
ISO Range	ISO 200-12800
Video Recording	1920 x 1080 (Full HD)
Shutter Speed	60 sec to 1/4000 sec
Video Format	Motion JPEG
Autofocus System	Contrast Detect (sensor)