Olympus E-PM1 User Manual

6 EN
Basic guide
Preparations for shooting
Attaching a lens to the camera
1
Remove the body cap from the camera and the rear cap from the lens.
1
2
1
2
2
Attach a lens to the camera.
# Cautions
Make sure the camera is turned off.
Do not press the lens release button.
Do not touch internal portions of the
camera.
•
•
•
Alignment
mark
Lens
attachment
mark
Align the lens attachment mark (red) on the camera
with the alignment mark (red) on the lens, then
insert the lens into the camera’s body.
Rotate the lens in the direction indicated by the
arrow until you hear it click.
•
•
3
Remove the lens cap.
2
1
1
Removing the lens from the camera
While pressing the lens release button, rotate the lens in the
direction of the arrow.
g “Interchangeable lenses” (P. 100)
2
1
Lens release button

Olympus E-PM1 Specifications

General

Sensor Type	Live MOS
Sensor Size	17.3 x 13.0 mm
Effective Pixels	12.3 MP
Screen Size	3.0 inches
Screen Resolution	460, 000 dots
Image Stabilization	Sensor-shift
Weight	217 g (body only)
Camera Type	Mirrorless
Continuous Shooting	5.5 fps
Focus Points	35
Built-in Flash	Yes
Storage Media	SD/SDHC/SDXC card
Battery	BLS-5 lithium-ion battery
ISO Range	ISO 200-12800
Video Recording	1920 x 1080 (Full HD)
Shutter Speed	60 sec to 1/4000 sec
Video Format	Motion JPEG
Autofocus System	Contrast Detect (sensor)