6 EMP-H35S, EMP-H65S & EMP-H100S QUICK REFERENCE GUIDE
LASER OPERATION
Adjust the aiming beam
n Select the aiming beam button on the main screen.
n The pop up displays the aiming beam intensity with an option to adjust, as well as the option
to select a solid or blinking aiming beam.
Laser parameter adjustment
n Press the touch screen to adjust the parameters on the selected emission mode.
n Use the +/- buttons to adjust the energy and frequency.
n Press the Emission Mode area to change the Emission mode.
n On the H65 and the H100 the pulse width can be further adjusted after the selection of a certain
mode. Select the drop down arrow to change the pulse duration to short, medium or long pulse.
To Next Page
Loading...
