Need help?Do you have a question about the Olympus VISERA ENF-V2 and is the answer not in the manual?
General| Type | Video Endoscope |
|---|---|
| Working Length | 300 mm |
| Light Source | Xenon |
| Compatibility | Olympus VISERA system |
| Angulation Down | 130° |
| Camera Resolution | HD |
Defines the primary purpose and scope of the endoscope's use.
Specifies required operator expertise and manual study.
Outlines essential safety guidelines and potential hazards during operation.
Details steps to take if the endoscopic image is lost or frozen.
Identifies and labels the various parts of the endoscope.
Explains the operational purpose of each endoscope component.
Lists technical details and operating parameters of the endoscope.
Details the necessary equipment setup before use.
Outlines procedures for inspecting the endoscope's condition.
Covers checks for the overall system's readiness and image quality.
Describes the correct technique for inserting the endoscope into the patient.
Explains the procedure for safely removing the endoscope.
Provides general guidelines for cleaning, disinfection, and sterilization.
Highlights critical safety measures during reprocessing.
Summarizes compatibility of reprocessing methods and agents.
Details appropriate disinfectant solutions and their usage.
Explains the process for ethylene oxide gas sterilization.
Describes steam sterilization procedures for accessories.
Lists necessary equipment for instrument reprocessing.
Outlines initial cleaning steps after use.
Describes methods to ensure the endoscope is waterproof.
Covers sterilization methods for the endoscope.
Provides guidelines for storing the endoscope.
Details procedures for transporting the endoscope.
Lists common problems and their solutions.
Explains the process for sending the endoscope for repairs.
Lists recommended equipment combinations.
Details electromagnetic compatibility and guidance.
To Next Page