EasyManua.ls Logo

Olympus VISERA ENF-V2 - Chapter 10: Troubleshooting and Repair; Appendix: System and EMC Information

Olympus VISERA ENF-V2
90 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
72
Chapter 10 Troubleshooting
VISERA RHINO-LARYNGO VIDEOSCOPE ENF-V2
Chapter 10 Troubleshooting
If the endoscope is visibly damaged, does not function as expected or is found to
have other irregularities during the inspection described in Chapter 3,
“Preparation and Inspection”, do not use the endoscope. Contact Olympus.
Some problems that appear to be malfunctions may be correctable by referring
to Section 10.1, “Troubleshooting guide”. If the problem cannot be resolved by
the described remedial action, stop using the endoscope and send it to Olympus
for repair.
Olympus does not repair accessory parts. If an accessory part becomes
damaged, contact Olympus to purchase a replacement.
Never use the endoscope on a patient if an abnormality is
suspected.
Damage or irregularity in the instrument may compromise
patient or user safety and may result in more severe
equipment damage.
If any abnormality in the function of the endoscope and/or endoscopic image is
suspected during use, stop the examination immediately and carefully withdraw
the endoscope from the patient as described in Section 10.2, “Withdrawal of the
endoscope with an abnormality” on page 74.

Table of Contents

Related product manuals