8 EMP-H35S, EMP-H65S & EMP-H100S QUICK REFERENCE GUIDE
LASER OPERATION
Manual mode on the H65 and H100
n On the H65 and H100, Manual mode may be selected on the home screen instead of a treatment type.
Selecting this mode will load the main screen without a pedal selection.
n In Manual mode, the energy, frequency, and pulse width modes are entered manually and can be saved
as a preset.
Viewing Fiber information
The Laser RFID system recognizes information on the OLYMPUS EMPOWER Laser Fiber and its use history.
n To display the data, touch the Fiber Info button on the Main screen.
n The pop up will display fiber size and type, number of uses, and date of last use.
n For a given procedure, the Main screen displays total energy (joules) and total time (seconds) emitted
through the fiber.
To Next Page
Loading...
