60
Chapter 2 Instrument Nomenclature and Specifications
EVIS LUCERA GIF/CF/PCF TYPE 260 Series OPERATION MANUAL
5. Place the hole on the fitting part over the endoscope’s S-cord connector
mount or the chain connector of the GIF-N260, GIF-XP260 (see Figure 2.3).
Figure 2.3
6. Confirm that the fitting part is securely attached to the foot of the S-cord
connector mount or the chain connector of the GIF-N260, GIF-XP260 and
can be smoothly rotated.
The instructions on the remaining pages of this manual are
given under the assumption that the chain for water-resistant
cap is detached from the endoscope.
Hole
S-cord connector
mount or chain
connector
Fitting part
To Next Page
Loading...