Chapter 3 Preparation and Inspection
71
EVIS LUCERA GIF/CF/PCF TYPE 260 Series OPERATION MANUAL
Inspection of the auxiliary water inlet cap (for endoscopes
with auxiliary water feeding only)
1.
Confirm that the auxiliary water inlet cap attached to the endoscope
connector has no dents, cracks, or other irregularities (see Figure 3.13).
2. Should any irregularity be observed, replace it with a new one as described
in “Attaching the auxiliary water inlet cap (for endoscopes with auxiliary
water feeding only)” on page 75.
Figure 3.13
Inspection of the auxiliary water tube (for endoscopes with
auxiliary water feeding only)
Confirm that the auxiliary water tube has no cracks, scratches, flaws, and other
damage (see Figure 3.14).
Figure 3.14
Auxiliary water inlet
Auxiliary water inlet cap
Endoscope connector
To Next Page
Loading...