The date and time set here are saved to image
file names, date prints, and other data.
1 Press
the
POWER
button
to
turn
on
the
camera.
• The date and time setting screen is displayed
when the date and time are not set.
POWERc:J+
_
Date and time setting screen
2 Use
<Jt>®
to
select
the
year
for
M·
CANCEL@
3 Press
€l
to
save
the
setting
for
[Y].
CANCEL+f!!!j
4
As
in
Steps 2 and
3,
use
<Jt>®~
€l
and
the
@
button
to
set
[M]
(month),
[0]
(day), and [TIME]
(hours
and minutes).
• For a precise time setting, press the
@ button as the time signal strikes
00 seconds.
CD
To
change the date and time, adjust the
setting from the menu.
[€)]
(Date/time)
(p.36)
The language for the menu and error messages
displayed on the monitor is selectable.
1 Set
the
mode
dial
to
a
position
other
than
GUIDE.
2 Press
the
MENU button, and
press
<Jt>®~€l
to
select
[Yr SETUP].
EN
To Next Page
Loading...
