Olympus FE-370 - Saving Battery Power between Shots; Turning off the Camera Sounds

~ Make the settings for the functions while referring to "Using the Menu" (p. 3).
® Use the camera to select the same video signal system as the one of connected TV ([NTSC]/
[PAL]).
@ Turn on the TV, and change "INPUT' to "VIDEO (an input jack connected to the camera)."
" For details
on changing the input source of the TV, refer to the TV's instruction manual.
@ Press the [E) button, and use <Jt>$~€l to select the image for playback.
(I) Depending on the TV's settings, the displayed images and information may become cropped.
Saving battery power between shots
[POWER SAVEl
:7..;;~SEIUP""-EQWEB.wSA\lE -;:_,,-,,,.,_,,,,,,~,_,~_.~
Turning off the camera sounds
[~ SILENTMODEl
~ .... ,~:;-SJL.Ehl.TMO.QE_· __ ===:7;;=---=:;
ON
Cancels [POWER SAVE].
When the camera is not being
used for approx. 10 seconds, the
monitor automatically turns off
to
save battery power.
To resume standby mode
Press any button, or turn the mode dial or
zoom lever.
ON
Settings in [SOUND SETIINGS]
(p. 35) become effective.
The electronic sounds (operating
sound, shutter
sound, warning
sound)
and playback sounds are
muted.
• [SOUND SETIINGS] (p. 35)
EN