EasyManua.ls Logo

Olympus FL-36 - Main Specifications

Olympus FL-36
33 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
6160
MAIN SPECIFICATIONS
Model Number : FS-FL36
Type : External electronic flash for digital still camera
Guide number : Automatic switching
36: When in 42 mm (85 mm with 135 type)
20: When in 12 mm (24 mm with 135 type)
8/10 switching: When the wide panel is used.
Firing angle : Automatic switching.
At 12 mm: Up-down 61
°
, left-right 78
°
(equivalent to image angle of 12 mm lens)*
At 42 mm: Up-down 21
°
, left-right 28
°
(equivalent to image angle of 42 mm lens)*
When the wide panel is used for 8 mm: Up-down 83°, left-right 101°
(equivalent to image angle of 8 mm lens)*
* ZOOM values are the FOUR THIRDS camera values.
Flash emission period : Approx. 1/20000 to 1/500 sec. (Variable according to the light intensity, except in FP
emission.)
Flash emission count :
Approx. 150 times (using the LR6-type AA (R6) alkaline dry cell batteries)
(at full activation) Approx. 320 times (using the LB-01 type lithium battery packs)
(Variable depending on shooting conditions)
Recharge time :
Approx. 7.5 seconds (using the AA (R6) alkaline manganese batteries)
(from full activation to Approx. 6.5 seconds (using the LB-01 type lithium battery packs)
charge lamp lighting)
Flash modes : TTL AUTO, AUTO, MANUAL, FP TTL AUTO, FP MANUAL
Bounce angles : Up 0 to 90°, down 7°, right 0 to 90°, left 0 to 180°
Auto power OFF : Interlocks with the auto power OFF operation of a camera with communication capa-
bility
Q When the Olympus E-1 digital camera enters the sleep mode, the FL-36 control panel displays
turn off. Is this normal?
A Ye s, it is normal. When the E-1 enters the sleep mode, the FL-36 does as well. When the camera
wakes up, so does the FL-36.
Q Does the FL-36 also turn off when the Olympus E-1 digital camera is turned off?
A When the E-1 is turned off, the FL-36 enters the sleep mode. When the E-1 is turned on again, the
FL-36 also turns on. When you want to turn off the FL-36, turn off the FL-36 before turning off the
E-1. In addition, when connected to a camera without communication capability, the FL-36
enters the sleep mode if it is not operated for about 15 minutes.

Related product manuals