23
EN
Using the bounce adapter
When you attach the supplied bounce adapter, the light passes through
it and is diffused even further, allowing for bounce shooting with an
even softer light. Also, the light diffuses to a larger area attenuating any
shadows on the subject and softening the picture.
1 Align the protrusion on the bounce
adapter to the groove on the electronic
flash and insert until it clicks in place.
Shooting without bounce adapter Shooting with bounce adapter
x
Notes
When the bounce adapter is attached, the guide number will be lower.
Groove
Protrusion
Accessory shoe
e00r2062cs2j.indb23e00r2062cs2j.indb23 2007/08/0114:43:582007/08/0114:43:58
To Next Page
Loading...
