Olympus FL 50R - Custom Setup and Wireless Operation; Custom Setup Menu

30
EN
Custom setup
Custom setup allows you to customize the electronic flash to suit your
preferences.
1 Press and hold the MODE button for
more than 2 seconds, until the setup
mode display appears in the control
panel.
2 Turn dial A to select the setup mode.
3 Turn dial B to select the value.
4 Press the MODE button to confirm the
setup.
Setup mode
Mode display
Value
display
Function
Default
value
Dial A Dial B
AF illuminator
AF illuminator is
activated according
to the control from
the camera.
A
AF illuminator is off.
Flash cable
Use this setting
when not using
the flash cable
(attaching to the
hot shoe or using a
clip-on).
on
Use this setting
when using the
flash cable (off-flash
cable).
MODE button
Dial B
Dial A
e00r2062cs2j.indb30e00r2062cs2j.indb30 2007/08/0114:43:592007/08/0114:43:59